This series of reducers are suitable for various industries and used in vertical transmission equipment. This model is a three-stage vertical cone and cylindrical gear reducer. The bevel gear adopts spiral teeth and cylindrical gear helical teeth, which has the characteristics of stable transmission and low noise.

The direction of rotation from the motor to the input shaft is counterclockwise (when facing the output shaft, it is clockwise)

Model and meaning.

Marking example: -The TZ type reducer with a mechanical power of 13KW and a speed ratio of 59.4 is marked as: TZ13-59.4.

The basic parameters of the TZ series reducer model TZ13TZ22TZ40TZ55TZ75 power (KW) 13/6P22/8P40/6P55/6P75/6P speed ratio 59.462.938.545.959.44248.554.2648.554.2648.558. 9 Weight (Kg) 590780128013001650

TZ type three-stage vertical gear reducer outline installation dimensions

1. Dimensions

TZ series reducer appearance installation size model parameters

LHH0L1D1D2b1B2e1e2TZ131 1296712908544285142590170TZ40TZ551271753309814595142590190T25516458053451255601201832130200TZ7516458923451255601601840130250

2. Foot size

Model parameter aa1a2ABCDEFMNRR6-φTZ1395187245176.76233.621 63360.62190555421502551106-φ18TZ2285220276206.92255.693206381.341 86606501952701206-018

Model parameter aa1a2ABCDR=D1EFrLPMN8-φTZ40TZ5570285390268256304.9348.267360390125150149.88170940552.48-φ27TZ7570285390268256304.9348.267360390125 150149.88170940552.48-p27

Installation, use and maintenance of TZ type three-stage vertical gear reducer

1. The reducer should be installed stably and firmly, and it should be able to rotate flexibly after installation.

2. After installation, you must inject the required lubricating oil, generally L-CKC100~L-CKC220 medium extreme pressure industrial gear oil (formerly N100, N150, N220), and the oil level should reach the oil level plug.

3. After the new deceleration is used for the first time for 20 days, the new lubricant must be replaced. In the future use, the quality of the oil should be checked regularly. If it is found to be deteriorated, it must be replaced at any time. At the same time, check the oil level frequently if it is lower than the specified height. Make up. Under normal circumstances, the oil should be changed once every six months for the reducer used continuously for a long time.

4. It is found that the oil temperature rises significantly and exceeds 85°C or produces abnormal noise and vibration during the working process. Stop using it, check the cause, and remove the fault before using it.

5. The user should have reasonable maintenance rules and regulations, and make detailed records of the operation of the reducer and the problems found in the maintenance for inspection.